supply original-spec engine / drive train for Lola T70 Mk3b

Moderators: Gerald Swan, Glyn Jones, Johan

supply original-spec engine / drive train for Lola T70 Mk3b

Postby dc365gt » Tue Jan 18, 2022 9:15 pm

I am also looking to source one or more original-spec engines and drive trains / gearboxes for the Lola T70 Mk3b - new or used in good condition will be considered. If you may have the ability to supply or may know somebody who may be able to supply, any information would be much appreciated. Thank you.
The general specifications are as follows:
ENGINE / DRIVE TRAIN SPECIFICATIONS
1-ENGINE
# Small Block Chevrolet : SBC V8 90 °
# Iron block
# Displacement : 304.6 Cubic Inches maximum – 4991 cc
# 4 bolts main bearing caps
# Light alloy flywheel authorized
# Aluminum heads authorized- 23 ° valve plane angle from vertical
# 2 valves per cylinder
# 2.02 Inches inlet valves max diameter
# 1.6 Inches exhaust valves max diameter
# Light alloy rockers on needle rollers bearings authorized
# Flat or roller tappets
# 4 x Weber 48 IDA downdraft carburetors
# MSD CDI authorized – Distributor (No electronic ignition system)
# Dry sump lubrication system – 3 stages max oil pump
Option :
# Lucas Mark II fuel injection
2-DRIVE TRAIN
# 3 disks clutch – 7.25 inches diameter ( Original : Borg&Beck)
# Mechanical or hydraulic release
# Hewland LG 500/600 to SBC adapter ; 3.75 or 4.25 inches
# Gear box : LG 500 (4 speeds) or LG600 (5 speeds) Mark 1 or Mark 2
# Base gear ratios :
1st 24-50
2nd 28-47
3rd 31-43
4th 33-49
5th 37-38
# Other ratios authorized
# Magnesium or aluminum housing
# Alternator mounted on gear box wheel shaft
dc365gt
 
Posts: 2
Joined: Sat Jan 01, 2022 10:35 am

Return to Lola Heritage Forum

Who is online

Users browsing this forum: No registered users and 25 guests

cron